2 position pneumatic electric solenoid valve to a 12 switch

They are have prewired connections that makes installation, maintenance, and control simple. Solid pneumatic valves offer reliability, low power consuming, and have a long life.

Food and beverage manufacturers use them to make, dispense or preserve food and beverage products. Aircrafts use pneumatic valves to control the pressure and flow of hot engine air to the windshield for the anti-icing and rain removal. This DC 12V 2-way 2-position solenoid valve features a diaphragm seal structure with normally closed switch and zero differential start function.

Pneumatic types of valves can be found in a wide array of industries. This valve is made with an aluminum alloy and has an aperture of 1/4”. Either the compressed air flows from port 1 to port 2 through the valve, or 1 is blocked while port 2 is exhausted via port 3. At the moment, the air supply pressure of the solenoid valve inlet enters the chamber on the other side of the valve core. When the 5/2-way pneumatic single solenoid valve is powered on, the magnetic power is generated to open the pilot head. When the coil is energized, the mode reverses. The gas circuit maintains its original state and makes no exchange. One valve seal always remains open and the other closed in the de-energized mode.

This valve is a 3/2 valve which means the valve has three port connections and two flow positions. This valve allows pneumatic control of position, flow, pressure and temperature. It is also the interface between electronic controllers and pneumatic systems. Solid 1/4' NPT 3 way 2 Position Pneumatic Electric Solenoid Valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control a large device.

2 position pneumatic electric solenoid valve to a 12 switch